Razor Wire With HD Galvanized Zinc

Here show galvanized razor wire new specifications.
ART 65 material hot dipped galvanized zinc
Thickness: 0.50mm +/- 0.05mm
Wire diameter: 2,5mm +/- 0.05mm
bars length: 65mm +/- 1mm
Bars width: 21mm + / - 1mm
Bars spacing:100mm +/- 2mm
450mm diameter and 35 rings
Straight length: 46.5m per roll after pull open
Standard covered length: 10m
Inner packing is plastic film
Outer packing in weaving bag strip

CBT-65 - Material. HD Galvanized Zinc
Thickness: 0.50mm +/- 0.05mm
Wire diameter: 2.50mm +/- 0.05mm
Bars length: 65mm +/- 1mm
Bars spacing: 100mm +/- 2mm
450mm diameter and 35 rings
Straight length: 46.5m per roll after pull open
Standard covered length: 10m
Inner packing: in plastic film
Outer packing: in weaving brag strip.
Razor Wire Production Processing
Razor Barbed Wire Production line must include 4 stations :
1. Razor Blade Punching Station: Decoiler, Press, Recoiler,
2.Concertina Razor Blade Profiling Station: Decoiler, Wire Stand, Profiler
3. Clipping Station
4.Packing Station How to make the razor wire? Here are the detailed production processing about it. First, the raw material is the galvanized sheet, stainless steel sheet or low carbon steel sheet, then cut the bar of tapes. The width of bar can be changeable according to the razor type.
Second, the razor wire cutting machine perforates the bars, then divides the sheet to two layers. With the processing of cutting, then get into the process of blade. Flatten the blade bar.
Third, combine the blade bar and inner wire. The wire is usually using stainless steel wire or iron wire. The wire in the middle of blade bar, with the machine, then the blade bar wrappers the wire. Last form the razor barbed wire, then pack the razor barbed wire into rolls. In the surface, use the sack cloth for package.